External Parties Not Getting Ring Back Tone

Unanswered Question
Feb 22nd, 2012


I have a issue whereby external calling parties to analog phones are not getting a ring back tone; no issues with internal calls. No issues with the IP phones as well.

The PBX is running on Cisco 2951 and CME version 7.1.

Any information would be very much appreciated. Thanks.


M Noor

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
boris.kudr Wed, 02/22/2012 - 20:35

Hi Mohammed,

Please post dial-peers and "debug isdn q931" for incoming calls from PSTN.

Most likely you would be able to fix the issue by adding "tone ringback alert-no-PI" into incoming POTS dial-peer.



adamcrisp Wed, 02/22/2012 - 22:28


You could try the global command "voice call send-alert" which changes slightly the ISDN ringback messages sent to the ISDN telco.


mohammednoor Fri, 02/24/2012 - 02:08

Hi Adam,

Thanks for the information. I had scheduled to isolate the issue this afternoon and the global command worked like a charm.


M Noor


Login or Register to take actions

This Discussion

Posted February 22, 2012 at 6:27 PM
Replies:5 Avg. Rating:
Views:317 Votes:0
Tags: No tags.

Discussions Leaderboard