×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

syslogs

Unanswered Question
Feb 29th, 2012
User Badges:

Hello,


I have got:


logging history informational

logging facility daemon

logging 192.168.12.15


and


snmp-server enable traps syslog


on my switches on the network.  I am getting clear text traps ok to the snmpc server under the history TAB but want the syslog information displayed on the CURRENT alarms tab.


Any ideas what i need to change to get the syslogs to appear on the screen.


regards

Kevin

Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
cadet alain Wed, 02/29/2012 - 10:19
User Badges:
  • Purple, 4500 points or more

Hi,


this seems more like a syslog server config, ain't it unless I misunderstood your query and you want the logging on your console device?


Regards.


Alain

ohareka70 Thu, 03/01/2012 - 05:38
User Badges:

Alain,


Its a syslog server called snmpc from www.Castlerock.com

We can see alarms and telnet / ssh into our routers and switches on the network after we setup the devices on site.


I think i was getting too many traps using #logging traps informational

so i am trying it with #logging traps warnings


If you look at the attachment on first email, i might also have too many snmp-server enable traps enabled so i will have to review these also.


regards,

Kevin

ohareka70 Fri, 03/02/2012 - 05:57
User Badges:

Any ideas how i can keep my syslog traffic but get rid of the switch port link up / down messages show below?


Info     02/03/2012 13:51:50 COMSW03                     Interface FastEthernet0/1, 1Link Down Trap                                                                                  

Info     02/03/2012 13:51:51 COMSW03                     COMSW03 UPDOWN - Interface FastEthernet0/1, changed state to down LINK error                                              

Info     02/03/2012 13:51:53 COMSW03                     COMSW03 UPDOWN - Interface FastEthernet0/1, changed state to up LINK error                                                

Info     02/03/2012 13:51:54 COMSW03                     Interface FastEthernet0/1, 1 Link Up Trap                                                                                    



thanks

Kevin

davy.timmermans Fri, 03/02/2012 - 06:54
User Badges:
  • Silver, 250 points or more

You can try if the switch accept the following interface command


interface fas0/1

no logging event link-status


for a range of ports (eg all ports from 1 till 24)


interface range fas0/1 - 24

no logging event link-status


HTH

Actions

This Discussion