02-29-2012 01:51 PM
I recently took over some IT support for a small church and they asked me to look at the SPA525G phones and figure out why the MWI will not indicate correctly if there are voicemails or not. i have turned on the message waiting under the EXT1 tab for each user. The Red MWI does not go off or blink or flash, just solid red. Both phones in the office have the same problem.
Any ideas?
Mike
03-02-2012 07:21 AM
Spoke with "Woody" at Cisco Tech support, nice guy. He had a couple of suggestions that I will try on my next office visit. I will clear both extensions/lines of any voicemails. Check status of MWI light. If no change, he directed me to the firmware download 7.4.9 for the SPA525g phone. I am hoping that this will fix the non resonsive MWI
03-06-2012 07:32 AM
an update, I cleared all messages and updated the firmware on each phone, the RED MWI light stays on and solid all of the time, whether there is a message or not. When I pickup the handset, I noticed a series of beeps and then the dial tone. Does that mean there is a message or a line is on hold? I checked all of the mailboxes, friends, family, work all are empty.
Any ideas?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide