Cisco Linksys RV082 VPN Router Port Translation

Rami Saber · ‎02-29-2012

Hi All,

We have a RV082 Router and we are trying to do port translation.

For example:

88.123.2.5:80>192.168.1.10:2334

88.123.2.5:81>192.168.1.10:2335

However this does not seem to be possible as I can only choose the source port and the destination IP address unlike the RVS4000.

Thanks

jasbryan · ‎03-05-2012

Rami,

You need to look under uPNP settings and confiugre so that's where you can set up PAT (port address translation)

Jasbryan