Solved: nexus1010 connectivity options change

davidcheung · ‎03-02-2012

Hi All,nexus1010 has 4 connectivity options. my questions is:

if we initially deploy option 1 for paired 1010 and 1000v switch has been built, are we able to change to other option e.g. option 3 later whithout requesting 1000v rebuild? Best REGARDS

mwronkow · ‎03-03-2012

Hello David,

Yes, the Nexus 1010 'network-uplink type' may be altered after VSBs are installed. After the configuration change is completed both N1010s must be reloaded at the same time. The control/packet/data vlans will automatically re-pin to the designated NIC ports.

FYI - In SP1(4) a new Flexible Networking option allows additional topologies.

Matthew

View solution in original post

mwronkow · ‎03-03-2012

Hello David,

Yes, the Nexus 1010 'network-uplink type' may be altered after VSBs are installed. After the configuration change is completed both N1010s must be reloaded at the same time. The control/packet/data vlans will automatically re-pin to the designated NIC ports.

FYI - In SP1(4) a new Flexible Networking option allows additional topologies.

Matthew

davidcheung · ‎03-04-2012

Thank u very much!!!