nexus1010 connectivity options change

Answered Question
Mar 2nd, 2012
User Badges:

Hi All,nexus1010 has 4 connectivity options. my questions is:

if we initially deploy option 1 for paired 1010 and 1000v switch has been built, are we able to change to other option e.g. option 3 later whithout requesting 1000v rebuild?  Best REGARDS

Correct Answer by mwronkow about 5 years 1 month ago

Hello David,


Yes, the Nexus 1010 'network-uplink type' may be altered after VSBs are installed.  After the configuration change is completed both N1010s must be reloaded at the same time.  The control/packet/data vlans will automatically re-pin to the designated NIC ports.


FYI - In SP1(4) a new Flexible Networking option allows additional topologies.


Matthew

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
mwronkow Sat, 03/03/2012 - 08:46
User Badges:
  • Cisco Employee,

Hello David,


Yes, the Nexus 1010 'network-uplink type' may be altered after VSBs are installed.  After the configuration change is completed both N1010s must be reloaded at the same time.  The control/packet/data vlans will automatically re-pin to the designated NIC ports.


FYI - In SP1(4) a new Flexible Networking option allows additional topologies.


Matthew

Actions

This Discussion