cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2090
Views
0
Helpful
9
Replies

Announcing UC320W 2.2.0 GA Firmware Release

WHAT:

Today we are announcing the General Availability of the Cisco UC320W 2.2.0 firmware feature release.  Features and bug fixes are described in the 2.2.0 release notes found here.

WHEN:

The 2.2.0 firmware version is available via the Cloud today.   This will be posted on CCO shortly.

HOW:

Log into the UC320W Configuration Utility on a system that has the WAN connected.  The 2.2.0 firmware version will appear as an upgrade option.

If you are on a release version lower than 2.1.2, please see this discussion for more information and a workaround for the Adobe Flash Player version 11 compatibility issue:

https://supportforums.cisco.com/thread/2112911

Please see the below release notes for upgrade instructions.

Release notes for the Cisco UC320W 2.2.0 firmware release can be found here.

UPDATE:

========

This release has been replaced by the 2.2.1 Release Candidate Release.  Please see the posting here:

https://supportforums.cisco.com/thread/2135552

Message was edited by: Christopher Edgeworth  -- reflected new 2.2.1 RC release

9 Replies 9

Dturner4777
Level 1
Level 1

Hi

Is there a list of which system changes needs a reset

Thanks

Haresh Khemani
Level 1
Level 1

Going to test this out right now!

Just Upgraded as the new features were so attractive.

Vmail to email page now says my .co.nz email addresses are invalid. seems happy with any address with only one . however: eg .com

This isn't a region pack thing is it?

chidcp999
Level 1
Level 1

I have a similar problem to Daniel, but with email addresses ending .co.uk. Seems a bit of a basic error to assume the world only uses .com email addresses!

The 'new features' may be useful to a limited number of users - 'hot phones', 'call restrictions' etc, but there is still no sign of the basic functionality that everyone on these forums keeps requesting - automatic outbound call routing without having to press a steering digit, the ability to simply redial a missed call (for example), without editing the number to append a steering digit, softphone support and remote office (VPN) support.

Extremely disappointed with the limited improvements, given how long we have been waiting for this update.

Clive

Hi Clive;

Thanks for your feedback. About the voice to email issue, we have opened an emergency defect and will provide a fix over the cloud very soon. About the new features, this is by no means the latest feature set we are adding. Next major release 2.3 will incorporate most of the features you are looking for, so we appreciate your patience. We are still working out the schedule details, will share as soon as committed.

Regards
Alberto

Haresh Khemani
Level 1
Level 1

Glad to see p-time parameters included in SIP settings beginning with FW release 2.2 (which has been currently pulled due to other bugs) so no need for PMF. Are there any plans to add registration timer parameter which can be changed?

HI Haresh,

Just curious ...What is the use case?  The service provider can always respond back with a lower expires time and the UC320W will honor it.  We have NAT keep alive mechanisms.

Chris

The ITSP reset the trunk during troubleshooting it was taking a longer time for the UC320 re-register and they asked if I could lower the timer. On that note, may be a way on UC320 to reset just the trunk other than rebooting the whole box.

Thanks Haresh.  Will look into adding a manual reregister feature.

Chris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: