Cat 6509- VSS - Minor Error (Sup module)

siby.thomas · ‎03-18-2012

Hi Guys,

We have a VSS environment with two Cisco 6509-Es.

IOS image:s72033-ipservicesk9_wan-mz.122-33.SXI5

when I switch on or reload the Core switches(VSS), I find a Minor Error in the "Show module switch all" command.

I also did a "show diagnostic result switch 1 module 5"

Switch 1 Module 5: Supervisor Engine 720 10GE (Active) SerialNo : SAL1521E035

Overall Diagnostic Result for Switch 1 Module 5 : MINOR ERROR

Diagnostic level at card bootup: complete

Test results: (. = Pass, F = Fail, U = Untested)

45) TestVslLocalLoopback:

Port 1 2 3 4 5

-------------------

U U U . F

This issue temporarily relieves when reseating the X2 module, but reappears after reloading the switch.

Any comments/Suggestions are highly appreciated.

Thanks,

Siby.

Leo Laohoo · ‎03-18-2012

RMA the module. If it's re-occurs then rest assured, something sinister is happening.

siby.thomas · ‎03-18-2012

Many thanks for the reply..

When I reload some times the Minor error appears and sometimes not.

Still do you think this could be a Hardware issue?

Reza Sharifi · ‎03-18-2012

Hi,

If the issue disappears when you reseat the X2 module, then replace the X2 module first. I am assuming you are referring to the X2 modules on the Sup right?

HTH

siby.thomas · ‎03-20-2012

Hi Reza,

Thanks for the reply,

Let me re-create the problem and confirm this.

Leo Laohoo · ‎03-18-2012

Still do you think this could be a Hardware issue?

Yes I do.