ACS 5.3 integration with cisco management tools

Unanswered Question
Mar 19th, 2012
User Badges:

Hi,


I have a cisco ACS 5.3 appliance , I want to use it for authenticating (tacacs protocol) user access for the following systems :

LMS 4.1

WLC 5500 series

NCS


I have had partial success configuring the authentication , most of the problem is in the ACS side , as I understand it I need to

take the "user tasks" from the system , copy past it to the ACS in the policy elements , I tried it but it didnt work


I know I didnt give many detailes , I didnt want to write 3 pages .  basically I am looking for reference to cisco documents as I couldnt find

exactly what I was looking for


I will be happy to provide more specific information


thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Dev Vishwakarma Thu, 03/22/2012 - 05:34
User Badges:
  • Cisco Employee,

Nir,


You can use following:


1] wlc --

http://www.cisco.com/en/US/partner/tech/tk722/tk809/technologies_configuration_example09186a0080782507.shtml


2] ncs --

http://www.cisco.com/en/US/partner/products/ps6305/products_tech_note09186a0080b904a4.shtml


3] lms -- cisco works can not be directly integrated with ACS 5.x. Although you can send a normal authentication request to the ACS.


Regards,

Dev

Actions

This Discussion