cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
703
Views
0
Helpful
1
Replies

ACS 5.3 integration with cisco management tools

nir.fisher
Level 1
Level 1

Hi,

I have a cisco ACS 5.3 appliance , I want to use it for authenticating (tacacs protocol) user access for the following systems :

LMS 4.1

WLC 5500 series

NCS

I have had partial success configuring the authentication , most of the problem is in the ACS side , as I understand it I need to

take the "user tasks" from the system , copy past it to the ACS in the policy elements , I tried it but it didnt work

I know I didnt give many detailes , I didnt want to write 3 pages .  basically I am looking for reference to cisco documents as I couldnt find

exactly what I was looking for

I will be happy to provide more specific information

thanks

1 Reply 1

Dev Vishwakarma
Cisco Employee
Cisco Employee

Nir,

You can use following:

1] wlc --

http://www.cisco.com/en/US/partner/tech/tk722/tk809/technologies_configuration_example09186a0080782507.shtml

2] ncs --

http://www.cisco.com/en/US/partner/products/ps6305/products_tech_note09186a0080b904a4.shtml

3] lms -- cisco works can not be directly integrated with ACS 5.x. Although you can send a normal authentication request to the ACS.

Regards,

Dev

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: