03-20-2012 04:37 AM - last edited on 03-25-2019 09:45 PM by ciscomoderator
hello,
when trying to access GUI from web page but getting blank page.
Configuration has been done on the router , also uploaded the GUI file on the flash memory, but when im trying to access through web browser nothing happens only blank page comes up.
Router - 2900
IOS version - 15.0(1)M3
CME Version - 7.1.1.0
GUI Version -7.1.0.0
Please let me know if im missing any steps
Solved! Go to Solution.
03-20-2012 10:34 AM
Have you done
show flash | i cme-gui-124-24T.tar or show flash | i gui ?
If you've done last one, then you've installed gui for CME wrongly.
1. First you need to extract files to flash from TFTP:
archive tar /xtract tftp://
2. Then enable http server
ip http server
ip http authentication local
ip http path flash:/gui
telephony-service
web admin system name
then do show flash | i gui anf there should be file named telephony_service.html (or similar) - open it in browser.
03-21-2012 07:55 AM
Any success here? Have tried my last recommendations?
03-20-2012 07:11 AM
Abhi,
Was a " Write Memory " & Router reboot tried ?
GP.
03-20-2012 08:20 AM
not yet can you please tell me the what does "write memory" command do.
Thanks
03-20-2012 07:15 AM
Have you used tftp path command?
Which web page are you trying to access? (exact name of html file)
03-20-2012 08:26 AM
Hi ,
not yet tired tftp path command , can you please tell me what does this command do.
the page which i'm trying to access is https://routeripaddress/ccme,html
03-20-2012 09:07 AM
Hi,
can you posts "show flash | i gui" output.
03-20-2012 09:27 AM
voicelab#show flash | i cme-gui-124-24T.tar
8 829440 Mar 20 2012 08:48:36 cme-gui-124-24T.tar
Please find the output
03-20-2012 10:34 AM
Have you done
show flash | i cme-gui-124-24T.tar or show flash | i gui ?
If you've done last one, then you've installed gui for CME wrongly.
1. First you need to extract files to flash from TFTP:
archive tar /xtract tftp://
2. Then enable http server
ip http server
ip http authentication local
ip http path flash:/gui
telephony-service
web admin system name
then do show flash | i gui anf there should be file named telephony_service.html (or similar) - open it in browser.
03-21-2012 07:55 AM
Any success here? Have tried my last recommendations?
03-21-2012 07:58 AM
Hi ,
Thanks a lot for your help , yes it worked
03-21-2012 08:42 AM
Good that it helped.
03-20-2012 07:49 AM
Which browser are you using ? Try firefox or older IE.
03-20-2012 08:27 AM
IE 8
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: