when trying to access GUI from web page but getting blank page.
Configuration has been done on the router , also uploaded the GUI file on the flash memory, but when im trying to access through web browser nothing happens only blank page comes up.
Router - 2900
IOS version - 15.0(1)M3
CME Version - 184.108.40.206
GUI Version -220.127.116.11
Please let me know if im missing any steps
Any success here? Have tried my last recommendations?
Have you done
show flash | i cme-gui-124-24T.tar or show flash | i gui ?
If you've done last one, then you've installed gui for CME wrongly.
1. First you need to extract files to flash from TFTP:
archive tar /xtract tftp:///cme-gui-124-24T.tar flash:
2. Then enable http server
ip http server
ip http authentication local
ip http path flash:/gui
web admin system name password
then do show flash | i gui anf there should be file named telephony_service.html (or similar) - open it in browser.