Copy running config to startup - Ciscoworks LMS 4

Unanswered Question
Mar 22nd, 2012
User Badges:

We were having a discussion in my group about startup vs running configs, and how often some network managers forget to "click save" when they configure a switch.  Is there a way to configure Ciscoworks to copy the running config to the startup?  I thought I saw one in the config archive jobs, but I can't find it now.


Thanks,


Paul

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Arthur Cruz Thu, 03/22/2012 - 11:43
User Badges:

You can definitely create a CiscoWorks job that issues the "copy run start" command, but I assume you're wanting it to be a recurring job. I can't remember if CiscoWorks can do recurring jobs...

Or you could just do it from the router itself with an EEM script. Something like:

event manager applet WRITE_MEM

event syslog pattern "%SYS-5-CONFIG_I: Configured"

action 1.0 cli command "wr"

action 2.0 syslog msg "Change detected, saving config..."


Sent from Cisco Technical Support iPad App

Michel Hegeraat Thu, 03/22/2012 - 11:48
User Badges:
  • Gold, 750 points or more

LMS also has the out of sync report that you can use as a basis for the sync


Not sure if this can be scheduled though


Cheers,


Michel

Actions

This Discussion

Related Content