Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

AP1242AG WPA and MAC Filtering problem

Unanswered Question
Mar 25th, 2012
User Badges:


Presently I managed some AP1242AG in ofiice area

I need implement WPA and MAC filtering.

I found what :

In IOS 12.2(13)JA branch IOS and before, MAC authentication was supported

in conjunction with WPA.

In 12.2(15)JA and above, configuring MAC authentication with WPA does not

work. MAC Authentication passes everyone through.

I can't found IOS 12.2(13) in Cisco site.

Can anybody help me and give link to download 12.2(13)JA ?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Justin Kurynny Sun, 03/25/2012 - 01:31
User Badges:
  • Silver, 250 points or more


Where did you find this information? Do you have a link?


zz3przgng Sun, 03/25/2012 - 02:03
User Badges:

Also when I acivete MAC filterring

access-list 700 deny   0024.d7ed.2204   0000.0000.0000

access-list 700 deny   0000.0000.0000   ffff.ffff.ffff

dot11 association mac-list 700

dot11 ssid zero!v

   vlan 390

   authentication open eap eap_methods

   authentication network-eap eap_methods

   authentication key-management wpa

   wpa-psk ascii 7 14531708030A2E1A3108212127015644


The WPA is working but MAC filtering not reject

IOS Ver.

Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.3(11)JA1, RELEASE SOFTWARE (fc2)


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode