03-25-2012 04:40 AM - edited 03-16-2019 10:17 AM
In the UK today it went into Summer Time and so our clocks have gone forward by 1 hour.
I have been advised that all handsets are still currently showing the old time, but after checking the voice gateways the NTP time is correct.
And so I am assuming that the time is set on Call Manager. We also have UCCX running with scripts, so I dont know if the times will affect the opening times.
Can somone get back to me ASAP with some guidance.
Thanks,
Natalia
03-25-2012 07:58 PM
Hi,
Please see if below link helps you to resolve the issue.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080b2cd0e.shtml
Regards
Ronak Patel
Please rate helpful posts.
03-26-2012 06:57 AM
Hi
Please check where your CUCM is getting it's time from. You should be using your NTP server.
Regards
Jay
03-27-2012 04:31 PM
Phones get their time from CUCM. You configure NTP servers, assign those to DateTime Groups, and then assign those to the Device Pool you want them to apply to. If this isn't already in place, it will require a Device Pool reset to apply the change.
03-28-2012 01:27 AM
SCCP phones are getting time from CUCM server. SIP phones - from NTP.
Check time on the CUCM with: utils ntp status
03-25-2013 05:21 AM
See https://supportforums.cisco.com/message/3891824#3891824
Not all phone models seems to be affected. No trouble at least with 7911, 7961, 7942, 7962.
You have to:
1) wait one week, for the time to automatically update.
2) change your timezone to a country with no DST (es. Africa Porto Novo), reset all the phones. Then, wait next week and re-change back your timezone to the correct one.
3) On some CUCM version apply the last DST .cop files, and reboot all the cluster.
03-25-2013 06:09 AM
Hi Natalia.
Cisco should release a frimware for the affected phones to solve this issue, right now it is prefered to do the workaround solutions
HTH
Anas
pelase rate if it is helpful
09-02-2013 01:08 PM
Hi guys,
I'm also having the same issue......... actually time and date for our IP phones was correct one week before but we were having some activity that's why we have to shutdown our entire data center.
after that our phones are having time difference of 4min. we are also using CUCM 8.5
My question is this, the time configuration is one time task or we have to configure it again once if CUCM got restarted
keeping in mind we are using CISCO IP phones 6941 & 7945
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: