Traffic coming out of VPN tunnel not routing

Unanswered Question
Mar 29th, 2012

I'm sending traffic through a VPN via tunnel interfaces that needs to get routed to the internet after it gets through the tunnel. The config of the router that is responsible for the routing of the VPN traffic after it comes out of the tunnel is attached.

Can anyone tell me why traffic from 10.41.0.0/16 destined for hosts 158.73.213.27 and 158.73.215.10 isn't getting routed out the VLAN 2 interface but all the other traffic destined for 158.73 is correctly routed to the 10.11 addresses?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
kmckayMRU Fri, 03/30/2012 - 11:31

I believe you may need to add "ip nat inside" onto the tunnel interface.

thomas.satafer.fan Fri, 03/30/2012 - 20:32

ip access-list extended NAT-ACL

permit ip 10.41.0.0 0.0.255.255 any

jasonww04 Mon, 04/02/2012 - 08:31

If I add that, the traffic will go out the wrong interface. I only want the 10.41.0.0/16 traffic going out the VLAN2 interface.

Actions

Login or Register to take actions

This Discussion

Posted March 29, 2012 at 8:56 AM
Stats:
Replies:3 Overall Rating:
Views:415 Votes:0
Shares:0
Tags: No tags.
 

Discussions Leaderboard

Rank Username Points
1
Jon Marshall
16,566
2
Reza Sharifi
9,299
3
Giuseppe Larosa
8,202
4
Peter Paluch
7,599
5
Leo Laohoo
7,591
Rank Username Points
Jon Marshall
542
Joseph W. Doherty
114
Reza Sharifi
111
Peter Paluch
71
Bilal Nawaz
64