cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
504
Views
0
Helpful
1
Replies

CFGGen Raid Setup : Failed to create Raid of integrated mi while installing Unity Connection

mohammad_omran
Level 1
Level 1

Dears

I am reciving the mentioned error when trying to install the Unity Connection Ver 7 on IBM 7825-I$ Server

Please Advice how to create the reaid file manually .

Best Regards

1 Accepted Solution

Accepted Solutions

Gajanan Pande
Cisco Employee
Cisco Employee

First, make sure that your server model is supported with CUC 7, details can be found here

Once done verifying that your server is supported, Try following steps

# Boot the system and press F 8 to get into embedded RAID array utility

# From the text-menu screen, select the RAID array and delete the logical disk

# Once it is completed, exit the utility

# Re-attempt the installation.

HTH


GP.


Pls rate helpful posts by clicking on stars below the post !!

View solution in original post

1 Reply 1

Gajanan Pande
Cisco Employee
Cisco Employee

First, make sure that your server model is supported with CUC 7, details can be found here

Once done verifying that your server is supported, Try following steps

# Boot the system and press F 8 to get into embedded RAID array utility

# From the text-menu screen, select the RAID array and delete the logical disk

# Once it is completed, exit the utility

# Re-attempt the installation.

HTH


GP.


Pls rate helpful posts by clicking on stars below the post !!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: