×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

NAM virtual appliance ver 5.1(2) capture filters broken?

Unanswered Question
Apr 3rd, 2012
User Badges:

I'm evaluating NAM 5.1(2) installed on Nexus 1010 for a customer. I have it up and running. Both Netflow and ERSPAN works fine but it's when I try to fileter what to capture with ERSPAN I run into problems.


This filer works fine:

Source 10.16.0.50/32

Dest 10.16.1.0/24

Encapsulation IP

Both directions - ticked


This captures all IP traffic between host 10.16.0.50 and network 10.16.1.0/24


At the moment I want to only capture udp packets so I limited the filter to the following

Source 10.16.0.50/32

Dest 10.16.1.0/24

Encapsulation IP

Both directions - ticked

Application or Port - Application

marked UDP in Application dropdown list


Now I see no packets att all. I have also tried

Source 10.16.0.50/32

Dest 10.16.1.0/24

Encapsulation IP

Both directions - ticked

Application or Port - Ports

source ports 0-65535

dest ports 0-65535


Still nothing comes in. Am I doing something wrong or is the filter broken?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content