HP DAC Copper Cable with Cisco 4900M

Answered Question
Apr 3rd, 2012

We have HP C7000/VC-Flex 10 Module  that I would like to connect to our Netapps NFS datastore.  The Cisco  switch that I will be using between HP Flex-10 and Netapps is Cisco  4900M.  I have a HP cable AP784A direct attach copper SFP+ to SFP+.   Which module I need to purchase and insert into my 4900M to support 10Gb  connectivity via HP DAC 10Gb cable.

Please Advise!

I have this problem too.
0 votes
Correct Answer by krun_shah about 2 years 2 weeks ago

You need

4900M 4 port 10GE half card with X2 interfaces (WS-X4904-10GE)

    OR

4900M 8 port 10GE half card with X2 interfaces (WS-X4908-10GE)

WITH

Cisco OneX Converter Module Converts an X2 Interface into One SFP+ Interface (CVR-X2-SFP10G)

I would recommend you to use following DAC cables from Cisco.

• SFP-H10GB-CU1M: 10GBASE-CU SFP+ Cable 1 meter (Version -02)

• SFP-H10GB-CU3M: 10GBASE-CU SFP+ Cable 3 meter (Version -02)

• SFP-H10GB-CU5M: 10GBASE-CU SFP+ Cable 5 meter (Version -02)

  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 5 (1 ratings)
Correct Answer
krun_shah Thu, 04/05/2012 - 06:05

You need

4900M 4 port 10GE half card with X2 interfaces (WS-X4904-10GE)

    OR

4900M 8 port 10GE half card with X2 interfaces (WS-X4908-10GE)

WITH

Cisco OneX Converter Module Converts an X2 Interface into One SFP+ Interface (CVR-X2-SFP10G)

I would recommend you to use following DAC cables from Cisco.

• SFP-H10GB-CU1M: 10GBASE-CU SFP+ Cable 1 meter (Version -02)

• SFP-H10GB-CU3M: 10GBASE-CU SFP+ Cable 3 meter (Version -02)

• SFP-H10GB-CU5M: 10GBASE-CU SFP+ Cable 5 meter (Version -02)

Actions

Login or Register to take actions

This Discussion

Posted April 3, 2012 at 11:57 PM
Stats:
Replies:1 Avg. Rating:5
Views:914 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard