Movi not connecting from outside

Unanswered Question
Apr 9th, 2012
User Badges:
  • Green, 3000 points or more

Hi Team,

I have a small Telepresence solution all set but still a little problem.

The Movi client works internally when I connect it to the VCS-Control and is able to talk to other endpoints.

The problem is when trying to connect the Movi client from the Internet to the VCS-Expressway (has a public IP).

Traffic gets to the VCS, but I don't see where to authenticate the Movi (locally or against LDAP).

In other words, the Movi client registers succesfully against the VCS-Control internally, but won't register against the VCS-Expressway from the outside (and is not a connectivity or filtering problem). I don't see how the VCS-Expressway is supposed to authenticate the Movi credentials.

Can someone point me in the right direction?

Thank you!


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jens Didriksen Mon, 04/09/2012 - 15:27
User Badges:
  • Blue, 1500 points or more

Take a look at these threads, should clear up a few things (there are some other threads covering this as well):

This doc shows you the different authentication options and how to implement them - this is for X7.1:


Alok Jaiswal Thu, 04/12/2012 - 09:48
User Badges:
  • Silver, 250 points or more

Hi Federico,

If you still facing problem then do port here.. However i think what Jens has pointed out you should be able to solve it.

I would suggest to porxy the request from expressway to control and let control take care of registration part.



Federico Coto F... Thu, 04/12/2012 - 12:58
User Badges:
  • Green, 3000 points or more


I'm still having the problem, but those are great links you sent me... I'm looking at those.

I should have an update shortly.

Thank you both!



This Discussion