×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Error while applying the Service Policy

Unanswered Question
Apr 9th, 2012
User Badges:

Hi,


I am getting the below error while applying the service policy to the Interface.

I have set the mpls exp 4 as well as want to limit the bandwidth to 1Mbps


PE#sh policy-map setexp-GBoIP


  Policy Map setexp-GBoIP

    Class GBoIP-traffic

      set mpls experimental imposition 4

     police cir 1024000 bc 32000

       conform-action transmit

       exceed-action drop


PE(config-if)#int vlan 2007

PE(config-if)#service-policy input setexp-GBoIP

QoS-ERROR: Addition/Modification made to policymap setexp-GBoIP and class GBoIP-traffic is not valid, command is rejected


As well as I have created new clas--map with priority and Bandwidth and applied in output direction, I got the belwo error while applying the Service policy in


PE(config-if)#service-policy out TEST

bandwidth command is not supported in output direction for this interface


PE(config-if)#service-policy output TEST

priority command is not supported in output direction for this interface




Any idea why so ?


Thanks in Advance.


Regards,

Nilesh

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion