[ACS 5.2.0.26] How to install cumulative update?

Answered Question
Apr 10th, 2012

Hello,

I want to install cumulative patch 9 for Cisco ACS 5.2.0.26

I found installation guide:

http://www.cisco.com/web/software/282766937/37718/Acs-5-2-0-26-9-Readme.txt

Instructions on how to install the patch  ========================================

1. open CLI console

2. define new repository in which the 5-2-0-26-9.tar.gpg resides

3. issue: 'acs patch install 5-2-0-26-9.tar.gpg repository YOUR_REPOSITORY'

We have configured 2 ACS appliances in "Split ACS Deployment"

ACS_deployment.JPG

How to install cumulative patch on 2 servers?

If I install on primary server, does the patch replicate on secondary?

Thanks for your help,

Patrick

I have this problem too.
0 votes
Correct Answer by jrabinow about 3 years 2 months ago

There is no need to deergister the secondary server. Can run with different patch versions for release

This would not work with running with two different releases (5.2 versus 5.3) in which case would need to be deregistered

Correct Answer by Jagdeep Gambhir about 3 years 2 months ago

Patrick,

Patch needs to be install on both ACS saprately via CLI. It will not replicate.

Regards,

~JG

Do rate helpful posts

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Correct Answer
Jagdeep Gambhir Tue, 04/10/2012 - 06:12

Patrick,

Patch needs to be install on both ACS saprately via CLI. It will not replicate.

Regards,

~JG

Do rate helpful posts

Patrick Tran Wed, 04/11/2012 - 00:17

Does secondary server need to be deregistered before patch installation ?

Regards,

Patrick

Correct Answer
jrabinow Wed, 04/11/2012 - 00:21

There is no need to deergister the secondary server. Can run with different patch versions for release

This would not work with running with two different releases (5.2 versus 5.3) in which case would need to be deregistered

Actions

This Discussion