Thansks  Vasilis,

even witout traffic BGP not up,if I removed service policy from Int Gi0/1 immediately BGP came up.

#sh policy-map shape-ZZZ-10

  Policy Map shape-ZZZ-10

    Class class-default

      Average Rate Traffic Shaping

      cir 10240000 (bps)

      service-policy pune-troy-qos

#sh policy-map  pune-troy-qos

  Policy Map pune-troy-qos

    Class COS1

      set ip dscp cs5

      priority 25 (%)

    Class COS2

      set ip dscp cs4

      bandwidth 20 (%)

    Class COS3

      set ip dscp cs2

      bandwidth 5 (%)

       packet-based wred, exponential weight 9

      dscp    min-threshold    max-threshold    mark-probablity

      ----------------------------------------------------------

      default (0)   -                -                1/10

    Class class-default

      set ip dscp default

      fair-queue

       packet-based wred, exponential weight 9

      dscp    min-threshold    max-threshold    mark-probablity

      ----------------------------------------------------------

      default (0)   -                -                1/10

#sh class-map COS1

Class Map match-any COS1 (id 3)

   Match ip  dscp cs6 (48)

   Match ip  dscp ef (46)

   Match ip  dscp af31 (26)

   Match ip  dscp cs3 (24)

#sh class-map COS2

Class Map match-any COS2 (id 2)

   Match ip  dscp cs4 (32)

   Match ip  dscp af21 (18)

   Match access-group name COS2_LIST

Hi Karthikeyan,

while in the problem state, could you provide:

sh policy-map int wan_int output

sh policy-map int wan_int output class

please?

Thanks,

Ivan.

Karthik,

Let me ask you a question. Did this work when you had the same policy for 10Mbps. I mean all you did was to upgrade the link from 10Mbs to 20Mbps right? or is it the first time you are applying Qos

Regards Kishore