04-12-2012 11:00 AM - edited 03-16-2019 10:36 AM
I want to do pressure test for UCCX. Can I simulate 300~400 calls to route point in CUCM?
CUCM 8.6.2
UCCX 8.5.1
Solved! Go to Solution.
04-13-2012 03:58 AM
Hi Robin,
For internal testing in Cisco we use Camelot tool for pumping calls through CUCM.
http://wwwin-vts.cisco.com/camelot/
Its an internal link for this tool.
I am not aware about the 3rd party tools for this purpose.
Hope it helps.
Anand
Please rate helpful posts !!
04-12-2012 11:07 AM
If you're asking if CUCM has built in some method to simulate calls for such purpose, no, it doesn't.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
04-12-2012 11:25 AM
Hi Java:
Do you mind to advice if there're other methods like third-party tools, or I have to code script via JTAPI? thx.
04-13-2012 03:58 AM
Hi Robin,
For internal testing in Cisco we use Camelot tool for pumping calls through CUCM.
http://wwwin-vts.cisco.com/camelot/
Its an internal link for this tool.
I am not aware about the 3rd party tools for this purpose.
Hope it helps.
Anand
Please rate helpful posts !!
04-13-2012 04:28 AM
Hello,
Honestly speaking , there is no built-in app which does this.Just curious to know the reason behind the testing.
Thanks
Siva
04-13-2012 06:31 AM
Hi Anand:
I cant open the link you attached. Is that for internal only? thx
Robin
04-13-2012 08:41 AM
Hi Robin,
Yes its an internal link.
Thanks,
Anand
Pls rate helpful posts !!
04-13-2012 09:22 AM
Best you can use is sipp, it's an opensource tool that can generate SIP and RTP traffic to fill the system with load.
05-24-2012 12:44 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: