Solved: Simulate calls in CUCM

Robin Zhu · ‎04-12-2012

I want to do pressure test for UCCX. Can I simulate 300~400 calls to route point in CUCM?

CUCM 8.6.2

UCCX 8.5.1

anchoudh · ‎04-13-2012

Hi Robin,

For internal testing in Cisco we use Camelot tool for pumping calls through CUCM.

Its an internal link for this tool.

I am not aware about the 3rd party tools for this purpose.

Hope it helps.

Anand

Please rate helpful posts !!

Jaime Valencia · ‎04-12-2012

If you're asking if CUCM has built in some method to simulate calls for such purpose, no, it doesn't.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Robin Zhu · ‎04-12-2012

Hi Java:

Do you mind to advice if there're other methods like third-party tools, or I have to code script via JTAPI? thx.

anchoudh · ‎04-13-2012

Hi Robin,

For internal testing in Cisco we use Camelot tool for pumping calls through CUCM.

Its an internal link for this tool.

I am not aware about the 3rd party tools for this purpose.

Hope it helps.

Anand

Please rate helpful posts !!

Sivakumar Shanmugam · ‎04-13-2012

Hello,

Honestly speaking , there is no built-in app which does this.Just curious to know the reason behind the testing.

Thanks

Siva

Robin Zhu · ‎04-13-2012

Hi Anand:

I cant open the link you attached. Is that for internal only? thx

Robin

anchoudh · ‎04-13-2012

Hi Robin,

Yes its an internal link.

Thanks,

Anand

Pls rate helpful posts !!

Robert Thomas · ‎04-13-2012

Best you can use is sipp, it's an opensource tool that can generate SIP and RTP traffic to fill the system with load.

laurent.flipo · ‎05-24-2012

Hello

... or you can use some commercial solution : http://www.spectra2.com

Laurent