Upgraded Stack, but have small error

Unanswered Question
Apr 13th, 2012

Hello,

I've updated a small stack containing 2 x 3750 and it is all working, but during the boot up I get this error:

Loading "flash:c3750-ipbase-mz.122-50.SE5/c3750-ipbase-mz.122-50.SE5.bin"...flash:c3750-ipbase-mz.122-50.SE5/c3750-ipbase-mz.122-50.SE5.bin: no such file or directory

Error loading "flash:c3750-ipbase-mz.122-50.SE5/c3750-ipbase-mz.122-50.SE5.bin"

Then

Loading "flash:/c3750-ipbasek9-mz.122-55.SE5.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@

How can I get it to use the right IOS on both switches on boot up?

Some more info:

sh switch

Switch#  Role   Mac Address     Priority Version  State

----------------------------------------------------------

1       Member a456.304c.f080     1            0          Ready

*2       Master a456.304c.8e00     15           0          Ready

sh flash1

Directory of flash1:/

    2  -rwx        5357  Apr 13 2012 10:39:15 +01:00  config.text
    3  -rwx        3854  Apr 13 2012 10:39:15 +01:00  private-config.text
    4  -rwx        5357  Apr 13 2012 10:39:15 +01:00  config.text.backup
    5  -rwx    12098310   Mar 1 1993 17:10:32 +00:00  c3750-ipbasek9-mz.122-55.SE5.bin
    7  -rwx        3854  Apr 13 2012 10:39:15 +01:00  private-config.text.backup
    8  -rwx         616   Mar 1 1993 00:02:46 +00:00  vlan.dat
    9  -rwx        3096   Mar 1 1993 00:02:57 +00:00  multiple-fs

sh flash2

Directory of flash:/

    2  -rwx        3854  Apr 13 2012 10:39:15 +01:00  private-config.text
    3  -rwx        5357  Apr 13 2012 10:39:15 +01:00  config.text
    4  -rwx         616   Mar 1 1993 00:17:25 +00:00  vlan.dat
    5  -rwx    12098310   Mar 1 1993 17:04:33 +00:00  c3750-ipbasek9-mz.122-55.SE5.bin
    6  -rwx        3096   Mar 1 1993 00:02:51 +00:00  multiple-fs

thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
hobbe Fri, 04/13/2012 - 03:16

Hi

The command

boot system switch all flash:/c3750-ipbasek9-mz.122-55.SE5.bin

should do the trick.

but to check boot variable run the command

sh boot

This is an error that states that it can not find the ios file that is specified in the boot variable but since it found another one it booted with that one instead.

so its not a big thing but you realy should change it anyway.

this is so that you can have several ios images in the system and choose wich one you want to boot on.

Good thing to have fx when you upgrade the ios and needs to do a rollback to the old version for some reason.

Good luck

HTH

Actions

Login or Register to take actions

This Discussion

Posted April 13, 2012 at 2:47 AM
Stats:
Replies:1 Avg. Rating:
Views:272 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard

Rank Username Points
1 15,007
2 8,150
3 7,725
4 7,083
5 6,742
Rank Username Points
170
82
70
69
55