Unanswered Question
Apr 16th, 2012
User Badges:

Do you know if it is possible to setup a PAP2T to automatically dial a particular number or extension?


We have a scenario where we have a lobby phone.  It is an Analog Phone connected to our VoIP PBX.  I'd like to have the PAP2T force the extension to dial the Main Office Extension when it is picked up.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Daniele Giordano Wed, 04/18/2012 - 02:37
User Badges:
  • Gold, 750 points or more

Try this:

- Create a hotline for all sequences on the System Dial Plan

EXAMPLE: (P9<:23> | (9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)

P9<:23> After taking the phone off hook, a user has 9 seconds to begin dialing. If no

digits are pressed within 9 seconds, the call is transmitted automatically to extension 23.

- Create a hotline on a line button for an extension

EXAMPLE: ( P0 <:1000>)

With the timer set to 0 seconds, the call is transmitted automatically to the specified

extension when the phone goes off hook.



This Discussion

Related Content