04-16-2012 08:44 AM - edited 03-07-2019 06:09 AM
Hello guys,
I would like to know the consequences by disabling Qos under the follwing interface ( in production environment)
#show mls qos interface gigabitethernet 3/0/31 queueing
GigabitEthernet3/0/31
Egress Priority Queue : enabled
Shaped queue weights (absolute) : 25 0 0 0
Shared queue weights : 10 10 60 20
The port bandwidth limit : 100 (Operational Bandwidth:100.0)
The port is mapped to qset : 2
Do I get any outage?
Thank you for helping.
Alioune
04-16-2012 09:16 AM
Hi Alioune,
As far as I know there is no way you can disable SRR (qos). The qos is enabled globaly, and you can tune it per interface (shape/share).
Regards
Dan
04-16-2012 09:21 AM
Hello
Dan-Ciprian Cicioiu,
Thank you for your response.
I have 2 questions
1- What is if I disable global QoS in live production?
2- these values are default or not?
Shaped queue weights (absolute) : 25 0 0 0
Shared queue weights : 10 10 60 20
Thx
Alioune
04-16-2012 09:30 AM
Hi,
I do not think that will be no traffic distruption.
As far as I know, and checked , this are not the default values for the shared qos
Regards
Dan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: