×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

IPM on IE-3000-8TC with AIR-LAP1242AG-E-K9

Unanswered Question
Apr 17th, 2012
User Badges:

How does IPM (Intelligent Power Management) work on IE-3000 switches (as compared to C2960G)?


I have a 1242 AP that connects via AIR-PWRINJ3 to an IE-3000 switch. For the management of the AP I have two WLC4404.

When I use the same configuration as I use for my C2960G access switches the AP only gets 5.8 watt. When I tick "Power Injector State" in the WLC Wireless>ap name>Advanced section it gets 15 watt. What do IE-3000 and C2960G do differently in IPM? In a Wireshark trace I see that on the IE-3000 three CDP messages are sent and on the C2960 four, but on both switches I do not see an explicit reply from the switch.


Anybody who has more knowledge or a link to a document that helps me understand this is very welcome.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion