×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

BRI interface not showing in show voice port summary

Answered Question

Hi,


I have a 2901 with a VIC3-2FXS/DID and a VIC2-2FXO cards.

These two cards work ok.




I bougth a WIC-1B-S/T-V3  to replace the FXO.

There are no voice ports showing for the BRI card after i installed it.


What am i doing wrong or what do i need to enable the voice ports for BRI?



Thank you,

laszlo

Correct Answer by acampbell about 5 years 4 months ago

Hi


Your WIC-1B-S/T-V3 card is a DATA WAN element it does NOT support voice.


You will need to consider a VIC2-2BRI-NT/TE

For voice working


Regards

Alex

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
acampbell Tue, 04/17/2012 - 08:16
User Badges:
  • Green, 3000 points or more

Hi


Your WIC-1B-S/T-V3 card is a DATA WAN element it does NOT support voice.


You will need to consider a VIC2-2BRI-NT/TE

For voice working


Regards

Alex

Actions

This Discussion