04-17-2012 08:07 AM - edited 03-16-2019 10:41 AM
Hi,
I have a 2901 with a VIC3-2FXS/DID and a VIC2-2FXO cards.
These two cards work ok.
I bougth a WIC-1B-S/T-V3 to replace the FXO.
There are no voice ports showing for the BRI card after i installed it.
What am i doing wrong or what do i need to enable the voice ports for BRI?
Thank you,
laszlo
Solved! Go to Solution.
04-17-2012 08:16 AM
Hi
Your WIC-1B-S/T-V3 card is a DATA WAN element it does NOT support voice.
You will need to consider a VIC2-2BRI-NT/TE
For voice working
Regards
Alex
04-17-2012 08:16 AM
Hi
Your WIC-1B-S/T-V3 card is a DATA WAN element it does NOT support voice.
You will need to consider a VIC2-2BRI-NT/TE
For voice working
Regards
Alex
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide