cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1009
Views
0
Helpful
3
Replies

DMP 4310 Doesn't play HTML

mjuarez2
Level 1
Level 1

We just picked up a couple of DMP 4310s. Most of our DMPs are 4400. I ran our regular content through the new DMPs and found that they don't play any from of HTML. I used a remote URL, as I do for the 4400s, then I uploaded an html file to see if there was any difference, but all I get in both cases is a blank area. Note, the content is played using the presentation template, and the zone is set up to rotate HTML driven content.

Does anyone have any suggestions on how to play HTML or is this just a "feature" of the 4310?

Thx.

-Michael

3 Replies 3

sdhanral
Level 1
Level 1

Michael,

DMP-4310 does not have a "Browser" yet so it won't play any HTML content.

https://supportforums.cisco.com/thread/2066144

Sagar Dhanrale

Hi, Sagar,

Do you know if there will be HTML support in the near future? I'd like to see if there is a timeline, as we'll need to take a different content deployment strategy if not.

Thanks.

-Michael

Hi,

Any ideas if the roadmaps include support for the browser feature?

Regards,

Erik

Sent from Cisco Technical Support iPad App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: