×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Standard Access List

Answered Question
Apr 18th, 2012
User Badges:

Guys,


Can you please confirm the commands in order to add any access list in the existing existing standard access list. For an example, there are two actions happening (10, 20) in the standard access list and I need to add a new (permit/deny) action (15) in between then what command will be used.


Thanks.

Correct Answer by Dan-Ciprian Cicioiu about 5 years 4 months ago

Hi Ray:


conf t

ip access-l stan name

15 permit host x.x.x.x


Dan

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Dan-Ciprian Cicioiu Wed, 04/18/2012 - 00:18
User Badges:
  • Gold, 750 points or more

Hi Ray:


conf t

ip access-l stan name

15 permit host x.x.x.x


Dan

ray_stone Wed, 04/18/2012 - 00:22
User Badges:

Thanks DAN... I appreciate of your prompt response.

tariqali1 Wed, 04/18/2012 - 03:12
User Badges:

This will create a little problem by introducing an access list in between two access list, Used name ACL.

glen.grant Wed, 04/18/2012 - 04:54
User Badges:
  • Purple, 4500 points or more

  Thats what Dan did , he is correct ...   Just because he used a number does not mean it's not a modifiable acl .  You just put a numbered ACL into acl config mode like Dan did . If you want to modify a numbered ACL you just do it like a named acl,


ip access-list stand 1

15 permit 192.168.2.X

Actions

This Discussion