×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco TelePresence EX90 Upgrade

Answered Question
Apr 18th, 2012
User Badges:

hello Folks,


I'm trying to upgrade the codec from TC4.2.1.265253   to TC 5.1


Do you guys have any recommendations or guidance on how to upgrade the codec properly


I'm requesting the release key form cisco as well


which one do i need to apply first the upgrade or the releae key


do you guys have a document that will tell me how to do the upgrade process?


i can't find one

thank you

Correct Answer by Magnus Ohm about 5 years 4 months ago

Hi there are several ways of upgrading. You can do it first and foremost from the endpoints webinterface. You type in the releasekey and upload the software there and press upgrade.


Wait for the process to finish its going to reboot. All configs are perserved and you should now be on the new version. The wevinterface is reachable on http://endpoint-ip


The release key can be typed after the upgrade as well


/magnus


Sent from Cisco Technical Support iPhone App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Magnus Ohm Wed, 04/18/2012 - 07:51
User Badges:
  • Cisco Employee,

Hi there are several ways of upgrading. You can do it first and foremost from the endpoints webinterface. You type in the releasekey and upload the software there and press upgrade.


Wait for the process to finish its going to reboot. All configs are perserved and you should now be on the new version. The wevinterface is reachable on http://endpoint-ip


The release key can be typed after the upgrade as well


/magnus


Sent from Cisco Technical Support iPhone App

Cristobal Jimen... Wed, 04/18/2012 - 08:59
User Badges:

thank you very much

I'm in the middle of the upgrade

i got the key from cisco as well

Actions

This Discussion