cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1419
Views
0
Helpful
3
Replies

Cisco TelePresence EX90 Upgrade

hello Folks,

I'm trying to upgrade the codec from TC4.2.1.265253   to TC 5.1

Do you guys have any recommendations or guidance on how to upgrade the codec properly

I'm requesting the release key form cisco as well

which one do i need to apply first the upgrade or the releae key

do you guys have a document that will tell me how to do the upgrade process?

i can't find one

thank you

1 Accepted Solution

Accepted Solutions

Magnus Ohm
Cisco Employee
Cisco Employee

Hi there are several ways of upgrading. You can do it first and foremost from the endpoints webinterface. You type in the releasekey and upload the software there and press upgrade.

Wait for the process to finish its going to reboot. All configs are perserved and you should now be on the new version. The wevinterface is reachable on http://endpoint-ip

The release key can be typed after the upgrade as well

/magnus

Sent from Cisco Technical Support iPhone App

View solution in original post

3 Replies 3

Magnus Ohm
Cisco Employee
Cisco Employee

Hi there are several ways of upgrading. You can do it first and foremost from the endpoints webinterface. You type in the releasekey and upload the software there and press upgrade.

Wait for the process to finish its going to reboot. All configs are perserved and you should now be on the new version. The wevinterface is reachable on http://endpoint-ip

The release key can be typed after the upgrade as well

/magnus

Sent from Cisco Technical Support iPhone App

thank you very much

I'm in the middle of the upgrade

i got the key from cisco as well

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: