04-18-2012 04:07 PM - edited 03-21-2019 05:40 AM
Hello,
I'm looking to deploy the UC320W at a client's who has also requested for a conference station, like the Polycom IP 6000 Conference IP Phone. Will the conference station work with the UC320W? Are there any other options I can explore?
Regards,
Femi
Solved! Go to Solution.
04-18-2012 04:15 PM
Hi Femi,
I have installed Polycom SoundStation 2 with a UC320W. Because the SoundStation2 is analog, I just plugged it in an fxs port and assigned it an extension. It worked fine.
Regards,
Naum
04-18-2012 04:15 PM
Hi Femi,
I have installed Polycom SoundStation 2 with a UC320W. Because the SoundStation2 is analog, I just plugged it in an fxs port and assigned it an extension. It worked fine.
Regards,
Naum
04-18-2012 10:34 PM
Hello Naum,
Thanks indeed for your comment. I guess this might just be a way out instead of the IP 6000. I had thought that since the IP 6000 was a SIP phone, that the UC320W would be able to work with it and any other Cisco supported SIP phones? Is this the case or not?
Regards,
Femi
04-18-2012 10:40 PM
Hi Femi,
I am not sure if the UC320W can communicate with the IP 6000. I have not had any previous experience with this device. Best will be to ask polycom directly.
Cheers,
Naum
04-19-2012 10:11 AM
Femi,
The UC320W does not support the IP 6000. The UC320W only supports Cisco Small Buisness IP Phones.
Regards,
Randy
04-19-2012 01:24 PM
Hello Randall,
Thanks.
Regards,
Femi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide