Help with Cisco 2911

Unanswered Question
Apr 20th, 2012

Hi All,

I have this new Cisco 2911 and have a few doubts regarding the device and also require help for configuration.

I have a dedicated Internet and a VPN coming from an ISP. Terminated at our end by OFC and connected to a Cisco ME 3400. The cables run to our server room.

For the dedicated line the following details where give

IP: XX.XXX.88.5

Subnet: 255.255.255.252

                  GW: XX.XXX.88.6

                  DNS 1: XX.XXX.6.5

DNS 2: XX.XXX.57.230

For the VPN the providers gave the following details:

PE interface IP: XXX.XX.83.113

Subnet: 255.255.255.252

CE interface IP: XXX.XX.83.114

Vlan: 446

The present configuration on the Cisco 2911 is as follows:

Building configuration...

Current configuration : 3524 bytes

!

! Last configuration change at 14:13:16 UTC Thu Apr 19 2012 by xxx

! NVRAM config last updated at 14:13:17 UTC Thu Apr 19 2012 by xxx

! NVRAM config last updated at 14:13:17 UTC Thu Apr 19 2012 by xxx

version 15.1

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname CORE_Router

!

boot-start-marker

boot-end-marker

!

!

logging buffered 51200 warnings

!

no aaa new-model

!

no ipv6 cef

ip source-route

ip cef

!       

!

!

!

!

no ip domain lookup

ip name-server xx.xxx.6.5

ip name-server xx.xxx.57.230

multilink bundle-name authenticated

!

!

crypto pki token default removal timeout 0

!

crypto pki trustpoint TP-self-signed-xxx

xxx

xxx

xxx

xxx

!

!

crypto pki certificate chain TP-self-signed-xxx

certificate self-signed 01

        quit

license udi pid CISCO2911/K9 sn xxxxxxxxx

!

!

username xxx privilege 15 secret 5 xxxxxxx

!

!

!

!       

!

!

interface Embedded-Service-Engine0/0

no ip address

shutdown

!

interface GigabitEthernet0/0

no ip address

shutdown

duplex auto

speed auto

!

interface GigabitEthernet0/1

no ip address

duplex auto

speed auto

!

interface GigabitEthernet0/1.105

description $XXX_DIA6$

encapsulation dot1Q 105

ip address xx.xxx.88.5 255.255.255.252

!

interface GigabitEthernet0/2

description $XXX_LAN$

ip address xxx.xxx.6.254 255.255.255.0

duplex auto

speed auto

!

ip forward-protocol nd

!

ip http server

ip http access-class 23

ip http authentication local

ip http secure-server

ip http timeout-policy idle 60 life 86400 requests 10000

!

ip route 0.0.0.0 0.0.0.0 xx.xxx.88.6

!

!

!

!

control-plane

!

!

!

line con 0

logging synchronous

login local

line aux 0

line 2

no activation-character

no exec

transport preferred none

transport input all

transport output pad telnet rlogin lapb-ta mop udptn v120 ssh

stopbits 1

line vty 0 4

access-class 23 in

privilege level 15

login local

transport input telnet ssh

line vty 5 15

access-class 23 in

privilege level 15

login local

transport input telnet ssh

!

scheduler allocate 20000 1000

end

I have a Cisco 2911 with default ports, and intend to connect the dedicated line to G0/0 and the VPN to G0/1 and connect my G0/2 to my LAN.

  •   Is this possible on Cisco 2911 router?
  • Can someone help me with a correct configuration for the set-up?
  • I have another Point-2-Point Leased Line from a different ISP, can that be configured on the same 2911 router with addition of a WAN interface card?

Consider me an absolute novice and wanting to gain as much knowledge as possible.

Thank You.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Sat, 04/21/2012 - 02:30

Only six hours have passed and you already solicit to get somebody else to configure your system ?

This is freely-contributed forum, recommend that for time-bound support you purchase a contract from Cisco or other company,

Jobin Varghese Sat, 04/21/2012 - 04:16

Paolo I wan't complaning. I understand what you are saying. Just was expressing my point. I do understand its a freely-contributed forum, but was thinking there would be many experts here.

Leo Laohoo Sat, 04/21/2012 - 20:07
Paolo I wan't complaning. I understand what you are saying. Just was expressing my point. I do understand its a freely-contributed forum, but was thinking there would be many experts here.

On a Saturday????  Are you kidding?

Anyone ? It's kind of an urgent issue. Sorry

Contact Cisco TAC.

Jobin Varghese Sun, 04/22/2012 - 04:33

On a Saturday????  Are you kidding?

Sorry about that, here in Middle East its just a friday that we get as weekend.

Pawan Sharma Sat, 04/21/2012 - 20:32

Hi Jobin,

Cisco 2911 have 3 giga ethernet ports by default you can use them in the following manner -

Gi 0/0 - For dedicated line

Gi 0/1 - For VPN Line

Gi 0/2 - For LAN Connectivity

for adding your point to point line to this router you will need one additional interface, For that you have various options available -

Option 1 - HWIC-1FE - One port Fast Ethernet Card - Routed

Option 2 - HWIC-4ESW - Four Port EtherSwitch card - Layer 2 but you can configure routing using SVI (This is one is a cheaper option and would also give you some additional ports for future use)

Lemme know if I could be of any further help.

Regards,

Pawan Sharma

http://www.ebrahma.com

Jobin Varghese Sun, 04/22/2012 - 04:42

Thanks Pawan. That solves a lot of the issue regarding the hardware. Are there anymore additions that i should make with the configuration ? It doesn't seem like communicating with the Cisco ME 3400. What additionla configurations do I make for the VPN along with the configuration.

Actions

This Discussion

Related Content