×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Jitter with non-Cisco phone

Unanswered Question

switchport trunk allowed vlan 1,2

switchport mode trunk

switchport nonegotiate

srr-queue bandwidth share 25 10 45 20

queue-set 2

priority-queue out

mls qos trust cos

auto qos voip trust

spanning-tree portfast trunk

spanning-tree bpduguard enable



Are there any issues with how my port is configured?  This port has a non Cisco phone attached with a dscp value of 46.  All uplink ports are crystal clear without drops/errors.

Actions

This Discussion