×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco VPN Client issue while changing the vpn pool

Unanswered Question

Hi,


We have already implemented Cisco client VPN service on Cisco ASA. My Cisco VPN ip pool is configured 174.26.4.0/22 & My corporate network pool is 172.26.4.0/22. which is working perfectly.


My concern is VPN pool 174.26.4.0/22 is comes under public range so i want to change this pool into private range (172.30.100.0/24)

so i changed below configuration.


no access-list nonat extended permit ip 172.26.4.0 255.255.252.0 174.26.4.0 255.255.252.0
no ip local pool testpool 174.26.4.0-174.26.4.253


access-list nonat extended permit ip 172.26.4.0 255.255.252.0 172.30.100.0 255.255.255.0
ip local pool testpool 172.30.100.1-172.30.100.254


After changing, i am able to connect vpn & vpn machine got ip address 172.30.100.1.

during VPN connection, vpn machine (172.30.100.1) is pinging from corporate network & even take the remote also but from VPN machine (172.30.100.1) I am not able to ping corporate network.


i am not able to understand where is my mistake?


Please help us


Regards

vinod Gupta

9810966625

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mvsheik123 Sun, 04/22/2012 - 14:43
User Badges:
  • Gold, 750 points or more

Config will definitely help but did you check if the VPN client getting corp network routes? Check the splittunnel settings.


thx

MS 

Actions

This Discussion