Authentication failed for realm level_15

Wassim Aouadi · ‎04-23-2012

hi,

I'm trying to configure HTTP server to authenticate users with AAA platform. I get the following error while trying to connect with Cisco Configuration Pro:

TNRTAGCS01002#

Apr 23 15:29:42.129 CET: HTTP AAA Login-Authentication List name: default

Apr 23 15:29:42.165 CET: HTTP: Authentication failed for realm level_15 or view_access

Apr 23 15:29:42.165 CET: HTTP: Authentication failed for level 15

Apr 23 15:29:44.193 CET: HTTP AAA Login-Authentication List name: default

Apr 23 15:29:44.225 CET: HTTP: Authentication failed for realm level_15 or view_access

Apr 23 15:29:44.225 CET: HTTP: Authentication failed for level 15

Here's the AAA config:

aaa new-model

!

aaa group server tacacs+ TACACS_group

server {A}

server {B}

!

tacacs-server host A key A1

tacacs-server host B key B1

!

ip tacacs source-interface GigabitEthernet0/0.1900

!

aaa authentication login default group TACACS_group local

aaa authentication enable default none

aaa authorization config-commands

aaa authorization commands 1 default group TACACS_group if-authenticated

aaa authorization commands 15 default group TACACS_group if-authenticated

aaa accounting exec default

action-type start-stop

group TACACS_group

!

Eduardo Aliaga · ‎04-23-2012

First, did you get it working using just local authentication ?

If so, I think you're missing the "ip http authentication aaa" command

Here's a good link about it http://blog.ioshints.info/2007/04/authenticating-http-requests-with-aaa.html

Please rate if it helps. Kind regards

Wassim Aouadi · ‎04-24-2012

Hi,

Yes, local authentication does work.

I added below the HTTP configuration:

ip http server

ip http authentication aaa login-authentication default

no ip http secure-server

I thought that HTTP would use the default method list for authentication. Is that possible or should I define a seperate AAA method list?

By the way, I always rate helpful posts