I have an AP1262 (autonomous) with multiple SSIDs, and VLANs.. all of my SSIDs are using WPA-PSK for authentication, but for one of my SSIDs, I also need mac address filtering AND WPA-PSK at the same time...
I know this is possible using a wireless controller..but can I do this with an autonomous AP.. I would also need to do this using the CLI, because its a remote AP, and cant HTTP into it, just telnet..
THanks a Lot
PS: show version
Cisco IOS Software, C1260 Software (AP3G1-K9W7-M), Version 12.4(25d)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 09-Dec-10 14:38 by prod_rel_team
ROM: Bootstrap program is C1260 boot loader
BOOTLDR: C1260 Boot Loader (AP3G1-BOOT-M) Version 12.4(23c)JA, RELEASE SOFTWARE (fc3)
1262-A uptime is 6 days, 14 hours, 59 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g1-k9w7-mx.124-25d.JA/ap3g1-k9w7-mx.124-25d.JA"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
cisco AIR-AP1262N-A-K9 (PowerPC460exr) processor (revision A0) with 81910K/49152K bytes of memory.
Processor board ID FTX1534E2TA
PowerPC460exr CPU at 666Mhz, revision number 0x18A8
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 70:81:05:51:3B:00
Part Number : 73-12175-05
PCA Assembly Number : 800-32268-05
PCA Revision Number : A0
PCB Serial Number : FOC15300WYN
Top Assembly Part Number : 800-33866-01
Top Assembly Serial Number : FTX1534E2TA
Top Revision Number : A0
Product/Model Number : AIR-AP1262N-A-K9
Configuration register is 0xF