1300 bridges

Unanswered Question
Apr 25th, 2012
User Badges:

Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of? I am really appreciated that.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
George Stefanick Wed, 04/25/2012 - 15:33
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, October 2015

As I recall and you should confirm this in the specs.


1400 is 5 GHZ only

1300 is 2.4 GHZ only


So, no ...

Chieu Dinh Wed, 04/25/2012 - 15:56
User Badges:

I checked the product data sheet for the 1400, here is what they said:


The concept of mobile networks is significant not only for service providers looking to offer seamless network access, but also for individual organizations such as municipal public safety units. In many instances, the technology exists to create the zones that provide the mobile network, but the challenge lies in bringing the network to these zones. The Cisco Aironet 1400 Series Wireless Bridge provides a cost-effective solution to this application. The wireless bridge can connect to the network that contains the 2.4 GHz access points or bridges that are providing wireless zone coverage, and also provide the backhaul link to the high-speed network (Figure 2). Whether these zones are 802.11 hot spots at cafes and restaurants or bridged 802.11b cells for mobile networks, the Cisco Aironet 1400 Series Wireless Bridge provides a non-interfering and higher speed distribution service.

Stephen Rodriguez Thu, 04/26/2012 - 07:58
User Badges:
  • Purple, 4500 points or more

As George had said, the 1400 is a 5Ghz AP only.  From the link you posted, look at Table 2.


Steve

Chieu Dinh Thu, 04/26/2012 - 08:54
User Badges:

I am really appreciated your helps Stephen and George. This information is help alot.

George Stefanick Thu, 04/26/2012 - 08:56
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, October 2015

yea, it saves you problems on the back end.


Keep in mind, Cisco axed both of these...

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode