×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ACL logs

Unanswered Question
Apr 28th, 2012
User Badges:

Hi Experts


i have an ACL 150 applied to Gi0/0 inbound direction,  with a log keyword on the deny line,now how can i see  the effects of this ACL,i mean the src address being blocked by acl



thanks


jamil

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
John Blakley Sat, 04/28/2012 - 06:08
User Badges:
  • Purple, 4500 points or more

Jamil,


It will either log to your buffer or wherever you're sending your logs (if you're using a syslog server). You can do a show log to see the results usually.


HTH,

John

Ibrahim Jamil Sat, 04/28/2012 - 06:40
User Badges:

Hi John


thanks for ur reply


i dont have a syslog server!


Can we go further, i need to debud this ACL ?


jamil

John Blakley Sat, 04/28/2012 - 06:43
User Badges:
  • Purple, 4500 points or more

Try just "show log" on the router.

Vasileios Boulo... Sat, 04/28/2012 - 10:05
User Badges:
  • Silver, 250 points or more

Hi Ibrahim,


You should have activated the logging to the buffered. In addition, you should configure the log to  debugging severity level if you need to also log the debug outputs.


Finally, I would recommned to increase the buffer size to a higher value than the default (4096) in order to avoid overwriting the logs

logging buffered [buffer-size| level]

level=7 debugging


Hope that helps,

Vasilis

Actions

This Discussion