Should it be possible to perform interface SNAT (dynamic or static) on interface ingress traffic heading to the IP address of the interface?
i.e. something along lines of: -
match destination-address 10.1.1.1 255.255.255.255
policy-map multi-match POLICY_MGMT_NAT
nat dynamic 10 vlan 99
interface vlan 99
ip address 10.1.1.1 255.255.255.0
service-policy in POLICY_MGMT_NAT
nat-pool 10 172.16.1.1 172.16.1.1 netmask 255.255.255.0 pat
I tried this quickly but did not seem to work
- so checking to see if anyone else done or know if it should work before ploughing on...