05-01-2012 08:04 AM - edited 03-13-2019 07:48 PM
Has anyone run into any issues with using CC machines with using SCCP on a VG202?
Setup: 2 CC Machines--> VG202 --> connecting to Call Manager 8.6 using DHCP. Both of my CC machines work fine doing a normal CC transaction, but at the end of the day the client runs a batch report on the cc machine but the cc machine will time out after 1 min. The Batch report usually takes about 3 to 4 mins to complete.
05-03-2012 02:42 AM
Have you set network-clock correctly on teh PRI gateway ?
09-06-2012 10:02 AM
Can you elaborate on your response? I'm having a similar issue with a VG-224.
Thanks!
Lisa Coody
09-07-2012 11:43 AM
Thank you!
Adding "network-clock-select 1 T1 0/0/0" to the config resolved the issue. No more slips and credit card machine runs smoothly now.
I very much appreciate your assistance.
09-10-2012 04:03 AM
Thank you for the nice rating and good luck!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: