cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1591
Views
0
Helpful
3
Replies

Pri Monitoring

jakins12
Level 1
Level 1

We have a UC540 with a PRI trunk in an ambulance service.  We are looking for methods to alert us when the pri is down.  Is there any monitoring tools or alerting that can be configured on the UC?

Thanks,                  

3 Replies 3

ggittins35
Level 1
Level 1

Unfortunately the uc does not have one

Solar winds ip monitor a good tool

Sent from Cisco Technical Support iPad App

danplacek
Level 4
Level 4

You could write a TCL EEM script to send you an email based on SYSLOG message patterns.

There are some examples for that kind of thing on the web.

http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_eem_policy_tcl.html#wp1209898

http://www.techrepublic.com/blog/networking/send-e-mail-with-your-cisco-router/454

http://www.ciscozine.com/2010/12/17/send-email-from-your-router-using-eem/

Your other option would be SNMP.

For something like an ambulance station I'd suggest getting a PRI failover service from your provider. Basically what happens is if the PRI goes down for any reason (UC power outage, system failure, cut lines, hdsl card failure etc) the Central office forwards predetermined DID's to a number of your choice automatically.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: