no access-class 23 in

Unanswered Question
May 2nd, 2012
User Badges:

Hi guys


I am having trouble to telnet into a cisco router remotetly.


This is part of the basic config I sent to be loaded



username cisco privilege 15 password 0 cisco

!


!

line con 0

password cisco

line aux 0

password cisco

line vty 0 4

password cisco

login local

transport input all

!


I can ping the router WAN address however I cant telnet. I was reviewing another configs which were successful and hadnt the no access-class 23 in


Any suggestions,please


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
John Blakley Wed, 05/02/2012 - 12:58
User Badges:
  • Purple, 4500 points or more

If this is a new router, some of the defaults are "access-class 23 in" and the acl that it references is "access-list 23 permit 10.10.10.0 0.0.0.255" (or something like that). Is that what you're asking?

Actions

This Discussion