SSID/VLANs for Guest/Staff with 3600 and 2504 Controller

Unanswered Question
May 3rd, 2012
User Badges:

We are deploying 3600 AP's with a 2504 and would like to create multiple SSID's that are mapped to unique VLANs so we can control the traffic at the Firewall.  We have the 2504 up and running with AP's but there appears to be no where in the 2504 controller Web GUI to configure a VLAN mapping to an SSID.  Any pointers to documentation on how to configure?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Stephen Rodriguez Thu, 05/03/2012 - 13:13
User Badges:
  • Purple, 4500 points or more

in the WLAN configuration, you select what interface you want it to be linked to.

In the Controller Tab, on the left, go to interfaces.  This is where you create teh interface name, set the VLAN,and the IP address.



This Discussion

Related Content



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode