05-03-2012 07:50 PM - edited 03-17-2019 11:08 PM
Hi all,
as we knew that MCU is server hardware like others, but especially for Cisco MCU Codian, maybe litle different.
anyone know what are factors which influence MCU performance (beside network factors) ?
because sometimes MCU get some problems like :
1. slow response (as example we too slow to open webconsole )
2. cause packetloss in each connection (per ports), but conference still can running.
3. and in some cases make mcu get down (hang)
i try to assume that all of it because networks, then i try to make some environment :
1. peer-to-peer connection LAN only between my laptop and MCU
2. LAN use Switch Gigabit and connected only my laptop and MCU
3. also i don't forget to try change ethernet setting in MCU adapted with environment
4. also i make sure there is no packetloss within networks if i use point-to-point between 2 endpoints
BUT after i try all of it, mcu still problem like that
maybe this is hardware issue, but i want to know more, because in my company this problems occured in many cases in customers (more than 4 cases).
also i make sure that the environment (like datacenter, power, temperature is going alright too, but who knows ??).
please help.
05-10-2012 10:35 PM
What Model of Codian is it? 42XX, 45XX, 85xx
Do you have many permanet confernces configued on it? DO you have any logging/tracing left enabled that could be adding CPU load unintentionally ?
I would also take a sniffer trace of the MCU switch port to see if you are getting unicast flodding, broadcast stroms etc
05-13-2012 07:24 PM
Hi Garvan,
our MCU were 42xx and 45xx, also we have 85xx but seems still normal for now
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide