×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

HSRP Filling up Logs

Unanswered Question
May 4th, 2012
User Badges:

It looks like both my HSRP Interfaces (VLAN 600 & 700) cycle through standby --> active ---> speak continuously on one of the two switches.  What can be causing this?



*May  4 06:41:24.883: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Speak -> Standby

*May  4 06:41:33.671: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Standby -> Active

*May  4 06:41:33.671: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Active -> Speak

*May  4 06:41:34.251: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Speak -> Standby

*May  4 06:41:47.691: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Standby -> Active

*May  4 06:41:47.703: %HSRP-5-STATECHANGE: Vlan700 Grp 0 state Active -> Speak

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
John Blakley Fri, 05/04/2012 - 08:35
User Badges:
  • Purple, 4500 points or more

Are you tracking interfaces? If not, you are losing hello packets somehow. I noticed that you have the configuration on group 0 which usually means that a group wasn't specified. Do you have another group on 0 as well? Can you post your HSRP config?


HTH,

John

Actions

This Discussion

Related Content